Parts Tables
Click a column header to sort.
Click a row to select that part for your configuration.
Parts which are not present in ANY configuration meeting the current filters are not shown. Dimmed parts are used in some configurations under the current filters, but would violate the filters if swapped onto the current kart.
All part data is transcribed from https://www.mariowiki.com/Mario_Kart_8_Deluxe, which has a much more detailed explanation of what the numbers represent.
Ranking Histograms
Every pixel of graph width represents 1 available part combination. The blue line is the currently presented kart. Click/drag to scrub along possible combinations to raise or lower the desired parameter. Graph height represents the raw value of the stat in question; coloration is based on how well the stat stacks up against the highest achievable value out of all karts.
Note that the parameters you are NOT scrubbing along will be updated to those of the particular combination which achieves the parameter value you HAVE scrubbed to. Because every value on each histogram must represent an actual buildable kart, there is no way to per se "lock in" a value you're happy with on a given slider. You CAN, however, set range filters on each parameter in the Filtering section, thereby recomputing the list of available configurations.
Filter Results
Allow/Disallow Parts
Constrain Value Ranges
Note: These are the RAW stat values. In-game formula, where displayed, is generally (RAW+3)/4, so e.g. a RAW value of 0 displays as 3/4 of a unit, a RAW value of 20 displays as 5.75 units on the yellow meters.